To ensure that your intercom works properly, it is important that it is installed successfully. That is why it is wise to entrust this task to a professional. Of course, this does not prevent you from installing it yourself. To do this, follow all the instructions given in the installation instructions for your intercom exactly.
Intercom installation: a safety issue
When installing an intercom, it is essential to secure the site properly. Moreover, as this is an electrical job, you must always be very careful. For this reason, safety rules must be observed. Also, do not forget to cut off the power during assembly and wear protective gloves. Also wrap a copper wire around your handle. Then, let it reach the ground to make mass.
Installation of an intercom: variable according to the models
The intercom rf remote control system is available in many versions. It can be audio or video, wireless or wired.
Although the wireless intercom is easy to install, it can quickly become restrictive. Indeed, it is imperative to check the power supply in the area that is far from home. But unlike the wire line model, it does not require trenching.
Installation of a wired intercom device
Before installing the intercom, it is essential to be equipped with all the necessary tools. Thus, you will need an electric drill or chisel, cutting and stripping pliers and wooden dowels. Do not forget the screwdriver, preferably, naturally insulated and with a protective sheath. A 12-volt long range wireless relay transformer is required to power the inner housing. To this are added screws, hammer, trowel, cement and metal pins. It is obvious that some of these materials will only be used to embed the base facing the street.
留言列表
